PIPO W1 Pro Review

Well… We have seen previously many tablets specifically 2-in-1 tablets during the past year. Among them, there is no lack of excellent tablet with decent performance. But usually, such a decent model always is available with a high price. Thus, an increase number of people are looking for cheaper 2-in-1 tablet PCs supporting stylus. In this sense, we come to the PIPO W1 Pro, a cost-effective 2 in 1 tablet PC that can turn into a full-featured laptop once the keyboard is installed.

     

Design

The device looks beautifully slim and fantastic to hold. The original PIPO W1 Pro comes with a 10.1 inch IPS OGS Touch Screen with a resolution of 1920 x 1200 pixels, which looks stunning and gives impressive color and clarity. Also, the IPS technology provides wide viewing angles of 178 degrees. 

Performance

It is powered by an Intel Atom X5 Z8350 64bit Quad Core 1.44GHz and works on Ultra Low Voltage platform to get the most out of the battery. In addition, this novelty comes with HD Graphics 400 GPU, 4GB DDR3L RAM, and 64GB ROM. This is not a dual-boot tablet as it runs only on one operating system that is Windows 10 Home. Honestly, the CPU, RAM and ROM are standard if compared to other similar products.

Highlights

PIPO W1 pro comes standard with a keyboard and an electromagnetic stylus. The highlight is the stylus featuring 1024 levels of pressure control. At the bottom of the device, you will find a magnetic docking port, to attach a keyboard which comes in the box all free. And also, PIPO W1 Pro 64GB comes with a massive 6000mAh battery that is sufficient for a whole day use.

Specs:

• OS: Windows 10 Home 64-bit
• CPU: Intel Atom X5-Z8350
• RAM: 4GB
• Internal memory: 64GB
• Display: 10.1 inches IPS (1,920 × 1,200)
• Wireless connectivity: 802.11b / g / n and Bluetooth 4.0
• Camera: 2MP on front / 5MP on rear
• Dimensions and weight: 256 × 172 × 9.3 mm / 535 g (keyboard weight is 514g)
• Battery: 6000mAh

And finally but the most importantly, the original PIPO W1 Pro 64GB can be ordered on Banggood at a coupon discount of 16% off (code: tabcrmas). What’s more, the top 100 orders would be sent with a free Transparent Screen Protector.

USB Micro Hub for Tablet PC

What to do if you want to move information from one flash drive to another, or to synchronize data on several external devices, such as the desired USB ports are already occupied by the printer, keyboard, mouse, camera, or USB modem? Disconnect all unnecessary at the moment, the devices, and after the necessary actions to join again? It is uncomfortable, tedious and harmful for your computer. To solve such problems and invented a device called a USB hub or a USB hub. This article will talk about how to choose the right USB hub for your needs.

Tablet USB hub (hub – hub) or the hub – a kind of splitter ports, allowing you to extend the functionality of the computer by increasing the number of externally connected devices equipped with interface USB, an intermediary between your computer and USB devices. USB (universal serial bus), as the name implies, was originally developed to enable connectivity of all devices to the appropriate controller on a computer. Such a controller is called a USB controller, it software control, and provides the programming logic for communicating with external devices, the connection of which is carried out using a special USB cable. This cable section has a few (2 to 6) copper spiral twisted pairs of copper wires (twisted pair) for transmission and reception of data, and two wires to provide power to the external device. If you hold a loose analogy, a USB hub is a road junction with traffic controller by radio.

As mentioned above, a powered Micro USB hub provides connectivity between peripheral devices and a computer. The interface itself was developed in 1994 and since then was divided into several specifications. Since modern USB hubs have on your hull ports with multiple specifications, to select a good device it is necessary to understand, than they differ from each other. The specifications differ in the supported data transfer speed, maximum current, which can give the controller the number of connected devices.

Cube iWork 1X Review

Before, the Intel Atom X5 series processor has been widely used in two-in-one tablet PCs. Especially, the Intel Atom X5-Z8300 processor was for the most. With the upgrade of Intel Atom series, the new model, Atom Z8350 processor, has come out. Today, we talk about the latest two-in-one tablet from Cube, iWork 1X, based on the Intel Z8350 processor.

Cube iWork 1X in silver-gray appearances stylish. The eye-catching Cube LOGO adopts the bas-relief design, making the overall sense of the tablet full of science and technology. The body edge is clean and neat, and the interface part is not frizz. For critical users, there seems to be nothing to be critical at the appearance of Cube iWork 1X. As for the interfaces, iWork 1X is equipped with a standard USB 3.0 interface, a Micro USB Slot, a Micro SD Card Slot, an Earphone port and a Mini HDMI port.

As already mentioned above, Cube iWork 1X 64GB is powered by the Intel Atom X5 Z8350 Quad Core 1.44 GHz(up to 1.92GHz) CPU processor and Intel HD Graphic GPU. And Original Cube iWork 1X comes with Windows 10 OS, 4GB RAM and 64GB ROM. What’s more, an 11.6 Inch IPS Capacitive screen with a resolution of 1920 x 1080 pixels will give you a perfect visual enjoyment. And it supports HDMI and Bluetooth function.

Built in with the 8500mAh battery, the original Cube iWork 1X performs excellent. After 1-hour high-intensity work, remaining power can be still maintained at 50% or more. We can see that, in the daily use, the battery life can be stable in more than 4 hours.

If you are looking for device to replace a laptop for day-to-day office work, then the Cube iWork 1X 64GB is qualified. And now, the original Cube iWork 1X 64GB can be ordered on Banggood at a discount of 11% OFF, asking for only $189.99.

Tools for Repairing Cellphone and Tablet

To fix the cell phone, not necessarily give it to the studio, you can do it yourself, especially if you are handy tools for repairing phones. After all, with all the advantages and disadvantages of mobile phones out of order, they are not so rare. The fact is that you can fix at home, does not require a huge amount of repair of accessories, most of them, so there are in every home. And with more serious damage will not help you any available means, there will need additional knowledge possessed only by specialists.

What tools are needed to repair the phone to fix minor troubles that prevent the normal operation of your mobile device, you will need:

1) Screw different size and type. They need to remove the case if necessary.

2) Tablet cell phone pry tool to parse the body. This tool is useful if the housing cover is not amenable to discovery.

3) The soldering iron. This thing will come in handy if you need to solder the chip.

4) Glue. It is required for any bonding plastic parts on the housing. What is inside, glue cannot be in any case.

5) Polishing paste for mobile displays. It's not exactly tools for mobile phone, but can be useful to restore the beauty.

6) Polishing paste for plastic. With it you can make phone supported by almost a new species.

Funds for the repair of the phone are available on a special website, which sells tools not only for mobile devices, but also in general to the art. Also some shops offering to buy their tools for repairing the phone. But, as a rule, there is quite a selection of small, and the prices are too high in a few times. But until now, this option is most appropriate if your machine suddenly broke down and run to the shops, or order the necessary supplies via the Internet no. BTW, you can select the repair tools at Banggood. Besides, you can easily get other tablet accessories (e.g. Nabi tablet charger) there with high quality and reasonable prices.